| |
Subject |
Author |
Date Posted |
Forum
|
 |
RE: Can's or Bottle's???
I think he aught to try "Mich. Golden Light" and forget about that "miller" all together.
|
bobbygasser216
|
11/30/08 08:05am |
Ovals & Enduros
|
|
looking for some skiis
Just looking for some oval ski's for the 3 inch spindles. If anyone has any decent used ones I might be interested.
|
bobbygasser216
|
11/28/08 06:47pm |
Ovals & Enduros
|
|
RE: Yamaha SRV 540
I wouldnt count the electrical out, but we had mny SRV's through out the years the one main reacurring problem was the Pipe. the guts would rot out and clog the insides. take your pipe of an shake it, if you hear any thing, you have a problem. it may be as simple as cutting it open and removing what ever is loose in there. I know they are a lot of stupd baffles and dumb little rount plates in there. than in the after muffler the guts in there are junk to. i would just remove that all together if possible.
|
bobbygasser216
|
11/26/08 09:50am |
Vintage Sleds Board
|
|
RE: Massey Ferguson triple liquid 440?
Dukster, Are you planning on having the vintage watercross again this year? I realy hope to get my TXL ready for it this year. I just ran out of time last year just trying to get my race sled ready.
|
bobbygasser216
|
11/26/08 09:44am |
Vintage Sleds Board
|
|
RE: Cant get clutch off
Do you have the right puller? the newer longer pullers won't work with that old of a clutch. Tighten it with a box end wrench, put a decent amount of torque on it, tap it with a hammer, even a decent sised mini-mall or ball peen hammer. You need that impact from the mettal to metal to break the wedge fit. using a plastic hammer just isn't going to cut it and its going to make things more difficult and confussing. Keep tightening some more and tap it again or at the same time, keep repeating this tell it comes of. it might help to put a little grease on the tip and threads of the puller. dont be scared of it! a lot of guys are but the odds of doing any dammage to the crank are slim. I use a peice of aluminum stock or an old aluminum radius rod to hold the clutch when torquing on it. Good luck! it's realy not as difficult as it seems and as some make it out to be.
|
bobbygasser216
|
11/26/08 09:39am |
Vintage Sleds Board
|
|
RE: ISR rule books
thanks guys,i more or less just wanted the rule book just for referencing here and there.
|
bobbygasser216
|
11/22/08 09:31pm |
Ovals & Enduros
|
|
RE: front suspension question
I realize they need to be shortend mike, that is not the problem though. with the X-10 shocks the will loose travel because the body is to long. and if I remember right when we use to have them shortened there wasn't but an inch if shock travel left. so a non x-10 shock would work better i believe. I'll know more in a week or so when I start to put the sled to geather.
|
bobbygasser216
|
11/22/08 04:58pm |
Ovals & Enduros
|
|
RE: ISR rule books
not a member of wsa yet and I'm more than likely only going to do 1-3 races, so I cant't see buying a full memmbership.
I just don't understand why ISR doesn't have a website, since they govern most of the snowmobile race cucuits out there.
|
bobbygasser216
|
11/22/08 04:40pm |
Ovals & Enduros
|
|
ISR rule books
Is there an ISR rule book on line. I can't find a website
|
bobbygasser216
|
11/21/08 08:41pm |
Ovals & Enduros
|
|
RE: front suspension question
Mike, I might be looking for some 8" front fox shock for the front. I think the stock 10" shock body's might be a littl to long. I have the origional track for that sled wich is it think 5/8" poo track from 95 with the Hooker setup on it from when we raced MRP. If I remember rightfrom Haydays, Timmer has the same track on his sled. He had the Hooker set up but wasn't in use.
|
bobbygasser216
|
11/21/08 12:29am |
Ovals & Enduros
|
|
RE: front suspension question
thanks guys, Mike back to what you were saying aboiut the sway bar. As i recall. back in 95/96, when we raced MRP, we were told to swich out the (stock)aluminum(sleeve with a steel bar in side)swaybar with a regular one piece torsion bar like most standard sleds have. I think the reasoning was it was to stiff but that was for le-mans racing. I'll have to give timmer a call and get some of these other issuse figured out. Getting excited. been slowlly getting some of the smoll things out of the way so once I get the motor mounted I can really dig into it, Just hope I have it ready for forest lake.
|
bobbygasser216
|
11/20/08 11:22am |
Ovals & Enduros
|
|
front suspension question
As some of you my have read in the past, I am think about building a 95 xcr sp chassis into a sportsman 600 sled. My question is, do I want to offset my front suspension to the right, by narrowing the left and widening the right side. if so what are some good dementions and what about setting the camber and the sway bar( this sled did come with the aluminum adjustable swabar)? there are also a few things i'm in need of;
oval ski's and carbides (stock poo spindals)
oval bars
race leagal belt gaurd for an Indy chassis
some good clutching and gearing idea's for a 44O with a team or a button clutch, I have both to choose from. which is better for ice? thanks guys.
|
bobbygasser216
|
11/19/08 07:42am |
Ovals & Enduros
|
|
04 Pro X 2 chassis for sale
04 ProX2 Chassis for sale no belly pan, hood, drive train, power train or suspention.
Bobby 651-967-2219
|
bobbygasser216
|
11/16/08 09:35am |
Buy, Sell or Trade
|
|
1980 TXL 340
parting out or would like to get rid of every thing. I have many extra parts and I did start to restore but just ran out of time and I need to get rid of it. $600 takes every thing
2 seets
2 hoods
2 sets of carbs
2 sets of cylinders both need to be bored or sleeved
2 heads (different years though)
many extra parts
updated the rear skid with mid 80's indy parts
track is good
cleaned and re-sealed and rivited the belly pan
|
bobbygasser216
|
11/02/08 09:57am |
Vintage Sleds Board
|
|
RE: '89 Indy 500 - $6,500
I'll give ya $65.00 write now for the whole setup!
|
bobbygasser216
|
10/14/08 02:40pm |
Buy, Sell or Trade
|
|
RE: 600 mod/ 800 stock rule
TTT
|
bobbygasser216
|
09/23/08 03:42pm |
Watercross
|
|
RE: Elmira, by
thats frigin great!
|
bobbygasser216
|
09/22/08 06:19pm |
Watercross
|
|
RE: Elmira, by
We Won? Awsome!
|
bobbygasser216
|
09/21/08 05:03pm |
Watercross
|
|
RE: 600 mod/ 800 stock rule
Shawn I know you are just tossing Idea's out there. As is every one else just don't be quick to shoot down others Idea's that's all. I do agree with some of what you are saying but we just need to find the happy medium so we do get it rite the first time. and yes leave the semi pro class alone for now and maybe add a semi pro improved stock (600 mod narrowed more) class in the future for the top semi pro's or make semi pro stock, beginner stock and ad the imp stock to split up the top drivers from the beginners to give new guys a chance at winning and keep them from getting discouraged with the sport as I and other could have easily done.
|
bobbygasser216
|
09/10/08 09:38pm |
Watercross
|
|
WTB IQ shift
possibly Looking for a used IQ shift high miles OK
|
bobbygasser216
|
09/10/08 08:01pm |
Buy, Sell or Trade
|
